Carbon impact of IT

Spoiler: To reduce our impact on the environment, we often wonder what choices to make and which technologies to favor. The comparison is difficult because it depends on many factors that are difficult to generalize. For those in a hurry, go for 1 gr eq. CO2 / minute.

The first time I heard about green computing was during a presentation of a fellow student somewhere around 2005. By disabling unused components of the micro-processor in real-time, it happened to save at least 10% of energy.

At the time, cynical, I had considered this green side as a buzzword to collect additional subsidies. The savings made are mainly financial and intended for data centers.

15 years later, after climate march, I realize how much his progress made sense and I ask myself today now the following question:

Can computing be green?

Picography @ pixabay

Foreplay

Measuring and calculating the impact of human activity on the environment is complicated. Because not everything can be measured, on the one hand, but also because the factors and impacts are very numerous:

To avoid dispersion and allow easier comparison between different activities, it is customary to reduce these impacts to equivalent in carbon grams, or geqCO2g~eq~CO_2. To simplify writing, the weights expressedhere (grams, kilos, etc.) will be understood in carbon equivalent.

Sources: Unless otherwise indicated, the values that I will use are taken from the Bilan GES database of ADEME, which summarizes the environmental impact of our human activities.

Impact of IT

Use

I will therefore tackle the carbon impact of the use of our IT equipment. Rather than a global, annual gender or per country impact, I would like to obtain a more precise impact, per minute of personal use. And for that, we will have to group the data…

stevepb @ pixabay

The energy impact, depends on the source used. EDF provided details for each. Unsurprisingly, the biggest impact comes from fossil fuels (>1000g/kWh>1000~g/kWh), renewable energies are more virtuous (<11g/kWh<11~g/kWh) and nuclear is apart (4g/kWh4~g/kWh).

And as the production uses several sources at the same time in proportions which change all the time, it is more interesting to look at the overall balance. The official EDF data gave an assessment global average of 26g/kWh26~g/kWh over the last 15 years, so I will start with this figure.

Edit of June 2023: It is now RTE which provides real-time emission values, the values are a little different but it doesn’t change much so I keep the old values.

Power consumption, depends on what you do with the equipment and how energy efficient it is. ADEME provided a total (La face cachée du numérique) over the year by type of equipment based on office use (8 hours for 225 days) compatible with the powers usually encountered.

To obtain the carbon impact from the power, we multiply the impact of the electricity, 26g/kWh26~g/kWh, by the power used (in kWkW, we must therefore divide our WW by 10001000 ) and the time (in hh, as we want one minute, we must divide by 6060).

Equipment Power WW Impact g/mg/m
Reader 1 0.0004
smartphone 7 0.0030
Tablet 16 0.0069
Notebook 50 0.0217
Screen 15 0.0065
Office computer 200 0.0867
computer games 1000 0.4333

Kindle: Kindle consumption is listed in the article What is the best device for reading in terms of CO2? for 0.7W0.7~W. So I arbitrarily put 1W1~W to give an idea.

Screen: For screen consumption, I start with a 24-inch screen, i.e. 1600cm21600~cm^2 and consumption around 100W/m2100~W/m^2 (cf. [Digitals] (https://www.lesnumeriques.com/moniteur-ecran-lcd/comparatif-ecran-lcd-moniteurs-22-a-30-pouces-a240.html)), or 15W15~W.

Gray energy

The previous impact is in fact incomplete because it does not take into account the impacts related to the manufacture and then the processing of equipment. Although these impacts occur before and after the use of the equipment, they are necessary for this use and are therefore usually distributed over the duration of use.

Samuel Mann @ flickr

ADEME’s bilan GES database provides the overall impact of the manufacture and treatment of equipment as well as its amortization over the period of use via an impact per year. It’s so heavy that the impacts here are in kilograms.

Equipment Impact kgkg Amortized kgkg
Reader 44 9
smartphone 32 16
Tablet 70 23
Notebook 169 42
Screen 265 40
Office computer 189 32
computer games 394 66

As I am looking for the impact per minute of use, I would like to be able to distribute this gray energy per minute as well. So I’m going to consider several scenarios:

The following table gives you this distribution of gray energy per minute of use according to the three scenarios.

Equipment Regular Pro. intensive
Reader 0.411 0.093 0.041
smartphone 0.731 0.166 0.073
Tablet 1.050 0.239 0.105
Notebook 1.918 0.436 0.192
Screen 1.826 0.415 0.183
Office computer 1.461 0.332 0.146
computer games 3.014 0.685 0.301

By comparing gray energy and used energy (calculation left as exercises), gray energy represents more than 90%90\% for all portable equipment, including e-readers, smartphones and tablets. For these last three, the difference is such that you can consider that the overall impact is entirely related to the life cycle.

For computers, the proportion varies from 90%90\% for regular use, between 60%60\% and 80%80\% for professional use and down to 40%40\% for intensive use. One might think that their manufacture is more ecological (since it counts less in the impact) but in fact, it is their energy consumption which is in fact 15 to 1000 times greater.

Quite intuitively, the smaller your equipment, the greater its impact, whether in terms of its life cycle or its use.

Impact comparison

Calculating the carbon impact of IT consists of adding the impacts of the equipment used. You can use my following tables for your situations but for the rest, I will take the example of a fixed PC with a screen.

But to be fair, two uses are worth distinguishing:

  1. Acquisition: The use justifies the acquisition of the equipment,
  2. Pooling: The equipment is already available.

Acquisition

The first case occurs when the equipment has been purchased to perform the task under consideration. All professional uses fall into this category. Family uses also when they are at the origin of the purchase.

To know the carbon impact of your use, you have to add the impact of the operating energy and the impact of the life cycle (manufacturing, treatment).

Impact Screen Fixed PC Total
Operation 0.0065 0.0867 0.0932
Life cycle 0.4150 0.3320 0.7470
Total 0.4215 0.4187 0.8402

In detail, we note that the impact of using a screen is much lower than that of a PC, normal since it consumes 6 times less electricity. But the balance is balanced between the two because the screen is actually heavier to build and recycle.

PC with dualscreen for 1,9613g/m. Free-Photos @ pixabay

Pooling

This second case occurs when the equipment was acquired for one use but you over-use it for other uses. For example, a professional computer on which you consult, once at home, your personal email. Or a family computer bought by the parents on which a child plays.

In this case, gray energy does not come into play because it is a sunk cost. Indeed, it is not rational to distribute the carbon impact over these uses since without them, the equipment would still have been acquired.

In our example, you would then only have an impact of 0.0932g/m0.0932~g/m, or 11%11\% of the impact if you had to acquire the equipment. And taking a high-performance PC with two screens, an impact of 0.4463g/m0.4463~g/m.

Example, e-reader or smartphone?

When we compare the impacts between an e-reader and a smartphone, we quickly see that the e-reader has a much lower impact than the smartphone. Half concerning gray energy, and a seventh for electricity. Assuming a regular use of 1h/d1h/d, we obtain the following impacts per minute:

Impact Reader smartphone
Operation 0.0004 0.0030
Life cycle 0.4110 0.7310
Total 0.4114 0.7340

We would then be tempted to quickly conclude: Let’s read on an e-reader rather than on a smartphone, the impact will be smaller.

This is totally valid if you are in a shop trying to decide on which equipment to buy. In this case, if your only use is to read ebooks and other electronic documents, the reader is more ecological than the smartphone.

But for those who already have a smartphone and do not intend to part with it, the balance is reversed. The gray energy of the smartphone is in this case a sunk cost; whether you buy an e-reader or not, the impact will remain the same. The question then is whether adding an e-reader, for 0.4114g/m0.4114~g/m, has a bigger impact than on using the smartphone, for 0.0030g/m0.0030~g/m, and this time, the answer is without call.

Note that in real life, if it is for reading books, you should also compare with paper.

Conclusion

Quite intuitively, the smaller the equipment, the greater its impact. Similarly, pooling resources allows a drastic reduction in the impact of additional use since it is no longer necessary to add new equipment.

The precise calculation of the impact is feasible but difficult to generalize because it depends on far too many factors such as the type of equipment, its frequency of use and the need for its acquisition. For example, a tertiary employee with a fixed PC and a screen generates 0.8402g/m0.8402~g/m of use.

To be complete, we could also reduce this impact in winter because the computer then participates in the heating of the building, and in the same approach, add part of the impact of air conditioning in summer since they add heat that the air conditioning tries to evacuate.

Coming back to the original question, Can IT be green? here are some comparisons:

So yes, IT has an environmental impact, but it remains well below our other activities. If you want to reduce your carbon impact, there are other priorities.